TV Jones Billy Zoomtron UNIV. MT Gold Neck
180,00 €
Spedizione Gratuita
Disponibile
In Italia la spedizione avviene con corriere espresso al costo di 9 €. Per ordini superiori a 129 € la spedizione è gratuita con calcolo automatico al checkout. Fuori dall’Italia la spedizione dipende dalla fascia del prodotto (piccolo, medio, grande, ingombrante): nell’Unione Europea da 19,90 € a 99 €, verso USA e Canada da 69 € a 600 €, nel resto del mondo da 79 € a 690 €. San Marino e Città del Vaticano come l’Italia. In Italia, nell’Unione Europea e a Monaco, con più prodotti nel carrello si paga una sola spedizione, quella della fascia più alta. Verso USA, Canada e resto del mondo ogni prodotto medio, grande o ingombrante viaggia in un collo a sé e paga la sua spedizione; i prodotti piccoli viaggiano insieme a loro senza costi in più.
La consegna avviene in 24/72 ore dall’ordine
In base alle normative vigenti i prodotti nuovi godono della garanzia biennale mentre l’usato della garanzia di un anno. Entro 14 giorni è possibile esercitare il diritto di reso con successivo rimborso
Le modalità di pagamento sono:
- Bonifico Bancario
- Paypal
- Paypal 3 Rate
- Carta di debito/credito o prepagata
- Ritiro in sede (contanti o carta)
- 3 rate mensili con sistema Scalapay (ordini fino a 3.000 € ad interessi 0)
BRAND: TV Jones
SCHEDA PRODOTTO
The Billy Zoom’Tron has a more subtly aggressive, punchy tone. A versatile design, which offers a clearer, more traditional Gretsch single-coil Dynasonic sound. They have a good amount of headroom for clean or slightly overdriven tones. And with no 60 cycle hum!
Zoom’Tron™ Neck Pickup Universal Mount™
The Zoom’Tron, with T-Armond innards, blends single-coil twang in the dual-coil Filter’Tron configuration. Comes with larger staggered Alnico cylinder magnets.
Tone/Characteristics
The Zoom’Tron is similar in tone to the MagnaTron, but with a beefier, fuller-bodied tone. The dual-coils provide a hint of compression to the high-end with no 60-cycle hum. Pickups with cylinder magnets add clarity to the low end or wound strings.
Output/Power
DC Resistance is not entirely an indicator of true pickup output, although it can be helpful.
Bridge: DCR – 12.60k / Inductance – 3.25H
Neck: DCR – 7.25k / Inductance – 1.70H
Installation
The Universal Mount is a direct drop-in replacement for guitars with standard sized Filter’Trons – with and without ‘ears’ or ‘clips’. This pickup comes with two pieces of compression rubber, 2 mounting (wood) screws, and the Universal Mount Clip Pack which includes everything you will need to mount the pickups to your ring or pickguard.
Wiring Notes
This pickup is shipped with 4-conductor wire but is ready for standard 2-conductor connection. The extra red and green wires come soldered together and taped off – to split coils, send these to ground.
Special Considerations
Filter’Tron Replacement: The Universal Mount is a direct drop-in replacement for guitars with Vintage Filter’trons, HS Filter’trons, Fideli’trons, Mega’trons, Full-trons and any other standard sized ‘Trons.
Blacktop Filter’Tron Replacement: You will need the Universal Mount and one Dual Screw Mount Adapter per pickup to mount into the stock rings.
Broad’Tron Replacement: You will need the Universal Mount along with a new EM2 Ring or EM5 Ring.
Gretsch-Bucker Replacement: You will need the Universal Mount along with a new EM2 Ring or EM5 Ring.
Post-2012 Electromatic Guitars: You will need the Universal Mount with one Dual Screw Mount Adapter per pickup. This is necessary to mount the pickup into your stock ring.
Streamliner Guitars: These guitars are made with ‘Gibson-style’ rings instead of standard Gretsch rings. You will want to choose the Universal Mount with either our EM1 Ring, EM2 Ring, or EM5 Ring to replace the stock ring when installing a Universal Mount Pickup (this depends on which style you prefer). If you choose either the EM2 or EM5 Gretsch-style Rings you will also want a pack of Ring Risers (due to the neck angle).
Gretsch 5120/5122 Guitars: You will need the Universal Mount along with an EM2 Ring or EM5 Ring and Ring Risers. Risers are recommended because the neck angle on these guitars tend to be high. You can find those in our Hardware section.
Gretsch 5420/5422 – early models: You will need the Universal Mount. If your guitar came stock with the large metal rings you will not be able to replace them with the smaller Gretsch rings because the footprint is too large. You will need one of our Dual Screw Mount Adapters for each pickup to attach the pickup to your stock ring.
Pre-2012 Pro Jet Guitars: These will require some specific modification in order to install No Ears Mount pickups. You can refer to our Pro Jet Resource Page which is in the Resources section.
Humbucker Replacement: To replace standard Humbuckers you will need the Universal Mount with one of our EM1 (Gibson-style), EM2 (Gretsch), EM5 (Gretsch), or EM4 (Fender-style) rings.
Potrebbe Interessarti
